|
Product Details:
|
| Nominal Capacity: | 100Ah | Nominal Voltage: | 3.2V |
|---|---|---|---|
| Internal Impedence: | Operating Votage: | 2.22V~3.65V | |
| Dimension: | 290(H)*130(W)*36(T) mm | Battery Weight: | 2.7 KG |
Nominal Voltage: 3.2V
Nominal Capacity: 100Ah
Operating Voltage:
2.22V~3.65V
Max. Charging Current: 1C
Max. Discharging Current:
2C
Dimension: 290(H)*130(W)*36(T) mm
1. 2C 200A
Continuous Discharge Current
2. 6C 600A Pulse Peak Current（10s)
3. Bolt
Terminal Structure, easy to assembly
4. With Endcaps
Protection
Parameter | |
Capacity（Ah） | 100 |
Product category | Prismatic aluminum case |
Thickness（mm） | 36 |
Width(mm) | 130 |
Height(mm) | 290 |
Nominal voltage(V) | 3.2 |
Weight（Kg） | 2.7 |
Standard current discharge（A） | 0.5C |
Operating voltage range(V) | 2.2～3.65 |
Operating temperature range(℃) | -20～55 |
Maximum charge rate (Continued) | 1C |
Maximum discharge rate (Continued) | 2C |
Cycle life（times） | 80%DOD≥2500 times |
The holders can not only facilitate the installation of the battery modules, but also ensure the gap between the batteries, prevent the battery expansion, and help the battery heat dissipation to improve the performance of batteries.
Precautions
and Safety Instructions
1 Standard
cell Precautions
a. Do not expose the cell to extreme heat or
flame.
b. Do not short circuit, over-charge or over-discharge the cell.
c. Do not subject the cell to strong mechanical shocks.
d. Do not
immerse the cell in water or sea water, or get it wet..
f. Do not
disassemble or modify the cell.
g. Do not handle or store with metallic like
necklaces, coins or hairpins, etc.
h. Do not use the cell with conspicuous
damage or deformation.
i. Do not connect cell to the plug socket or
car-cigarette-plug.
j. Do not make the direct soldering onto a cell.
k.
Do not touch a leaked cell directly.
l. Do not use for other equipment.
m. Do not use Lithium-ion cell in mixture.
n. Do not use or leave the
cell under the blazing sun (or in heated car by sunshine).
o. Keep cell away
from children.
p. Do not drive a nail into the cell, strike it by hammer or
tread it.
q. Do not give cell impact or fling it.
2.Cell
Operation Instructions
2.1 Charging
a. Charge the cell
in a temperature range of 0°C to + 50°C.
b. Charge the cell at a constant
current of 0.3Cuntil 3.65V, and then at a constant voltage of 3.65V until
0.05C. Charge rates greater than 1C are NOT recommended. (C : Rated Capacity
of cell)
c. Use a constant current, constant voltage (CC/CV) lithium-ion
(Li+) cell charge controller.
d. Do not continue to charge cell over
specified time. 。
2.2 Discharging
a. Recommended cut-off voltage
to 2.2V. Recommended max continuous discharge current is 3C。
b. For maximum
performance, discharge the cell in a temperature range of -20°C to +50°C.
2.3 Storage Recommendations
In case of long period storage (more
than 3 months), storage the cell at temperature range of –10 ~ +45°C, low
humidity, no corrosive gas atmosphere，No press on the cell；And more than 3
months need to put a charge according to the standard charge and discharge
process
Contact Person: Miss. Elsa Liu
| WhatsApp : | +8617763274209 |
|---|---|
| Skype : | +8617763274209 |
| WeChat : | 17763274209 |
| Email : | Elsa@lifepo4-battery.com |
