|Input Voltage:||/||Rated Power:||/|
|Output Voltage:||/||Output Current:||/|
3.65V 20A Lithium Iron Phosphate Battery Charger
Fully automatic design, non-reversible connection
Overcurrent/Overvoltage/Over-temperature/Short circuit/Overcharge protection
Equipped with charging indicator lights: red light indicates charging, green light indicates full charge
Constant voltage and constant current intelligent charging
1. Emergency switch: When the battery cannot respond to the voltage (abnormal battery or voltage below normal value), you can try to charge the battery through the emergency switch
2. Dual LED indicatior: One red and one green: charging is completed, standby Two lights on red:charging
110 / 220V
Maximum input power
Floating charge voltage (for lead-acid batteries only)
Maximum charging current
Turn lamp current
When the output voltage of the charger exceeds the maximum charging voltage, the charger enters the standby protection state and can automatically return to the normal working state after troubleshooting.
When the output current of the charger exceeds the maximum charging current, the charger enters the over-current protection state, and the output current will be limited to the maximum charging current value, and the output voltage will be reduced to close to 0V. Automatic return to normal working state after troubleshooting.
When the output of the charger is short circuit, the charger enters the short circuit protection state, the output current is constant as the maximum charging current value, the output voltage is close to 0V, and automatically returns the normal working state after troubleshooting.
When the correct output negative electrode of the charger is inversely connected with the positive and negative electrode of the battery pack, the relay does not engage, and there is no voltage current at the output terminal of the charger, and the charger can charge normally after correct wiring.
Contact Person: Miss. Elsa Liu